Customizing Your Monitor
Adjusting the Backlight
If the screen is too bright when you are using the monitor in
Setting the Power Saving Delay Time
a dark room, adjust the backlight.
1Press the MENU button.
The MENU OSD appears.
MENU
MENU OK
MENU
EXIT
PHASE
PITCH
CENTER
COLOR
LANGUAGE
OPTION
You can set the delay time before the monitor enters the power saving mode. See page 18 for more information on this monitor’s power saving capabilities.
1Press the MENU button.
The MENU OSD appears. | MENU OK MENU |
MENU | EXIT |
PHASE | |
| PITCH |
| CENTER |
| COLOR |
| LANGUAGE |
2Press the ˘/³buttons to select OPTION, and press the MENU button again.
The OPTION OSD appears.
| OPTION |
MENU |
|
| : 5SEC |
| : UNLOCK |
| OSD H POSITION |
3 Press the ˘/³buttons to select | (BACKLIGHT). |
| OPTION |
| 26 |
| : UNLOCK |
| BACKLIGHT |
4Press the +/– buttons to adjust the light level.
The OPTION OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.
OPTION |
2Press the ˘/³buttons to select OPTION, and press the MENU button again.
The OPTION OSD appears.
OPTION
MENU
: 5SEC
: UNLOCK
OSD H POSITION
3 Press the ˘/³buttons to select 
ZZ... (PWR SAVE
DELAY).
OPTION
60MIN
1MIN
5SEC
OFF
PWR SAVE DELAY
4Press the +/– buttons to select the desired time.
When PWR SAVE DELAY is set to OFF, the monitor does not go into power saving mode.
The OPTION OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button twice.
16