If you meet any trouble during installation or normal use of your
Read Problems
Symptom | Possible Causes | Solutions |
Symptom | Possible Causes | Solutions |
No sound from | • The sound board | • Connect speakers |
external speaker | isn’t working | to the headphone |
when you’re playing | properly. | jack of your CD- |
a music CD. |
| RW drive while |
|
| playing a music |
No | • IDE cable and the |
recognition. | |
| not connected |
| properly. |
•Ensure that both connectors of IDE cable is properly connected to the IDE ports on the main board and
CD. If you hear |
sound from the |
speakers, the drive |
is working fine. |
• Ensure that your |
correctly linked to |
• Conflicts with | • Ensure the |
other IDE devices. | Master/Slave |
| device setting of |
| |
| conflict with the |
| other IDE device |
| connected to the |
| same IDE port. |
• Power is not | • Check if LED of |
switched on. | your |
| is lit. If not, there |
| is no power. |
|
| the sound board. |
|
| • Check if the (MCI) |
|
| |
|
| installed. |
|
|
|
Low sound level | • Improper level | • Check if the |
from | setting in Windows | Masters, CD and |
| audio mixer. | Line levels in every |
|
| audio mixer are |
| • Improper audio | correct. |
| cable connection |
|
| between | • Ensure the audio |
| drive and sound | cable is properly |
| board. | connected to the |
|
| CD or Line input |
|
| of your sound |
|
| board. |
26 | 27 |