Set up

Preparing the Cyber-shot Station1 Select a station plate.

The station plates have a front side and bottom side.

Front sideSony logoBottom sidePlate name

Select the station plate corresponding with your camera.

Model name

Plate name

Sliding

 

 

direction

DSC-T300

HD2-A

Right

DSC-W110

 

 

DSC-W115

 

 

DSC-W120

HD2-B

Left

DSC-W125

 

 

DSC-W130

 

 

DSC-W150

HD2-C

Left

DSC-W170

 

 

DSC-W300

HD2-D

Left

DSC-T2

 

 

DSC-T70

HD2-E

Right

DSC-T75

 

 

2 Attach the station plate.

Hold the station plate on the front side (the side with the Sony logo) facing you, and place it on the I/O unit of the Cyber-shot Station as if you place it over the protection cover attached on the I/O unit.

Using a right-sliding station plate (such as HD2-A)Using a left-sliding station plate (such as HD2-B)

Hold the Cyber-shot Station with one hand. Hold the camera side guide of the station plate with the other hand and slide the station plate until it is pushed in all the way.

See the table in step 1 for the sliding direction.

Sliding to the rightSliding to the left
12-GB