Step 3: Performing the Quick Setup

Follow the Steps below to make the basic adjustments for using the system.

Displayed items vary depending on the country model.

Note

When you connect the system and the TV with the HDMI cable (not supplied), you need to set the type of video output for matching your TV. For details, see “Setting the type of video output to match your TV” (page 23).

"/1

C/X/x/c,

DISPLAY

1 Turn on the TV.2 Press [/1.

Note

Make sure that the function is set to “DVD” (page 24).

3 Switch the input selector on your TV so that the signal from the system appears on the TV screen.

[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the TV screen. If this message does not appear, recall the Quick Setup display (page 23) and perform again.

4 Press without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

LANGUAGE SETUP

OSD:ENGLISH

MENU:ENGLISH

AUDIO:FRENCH

SUBTITLE:SPANISH

PORTUGUESE

5 Press X/x to select a language.

The system displays the menu and subtitles in the selected language.

6 Press .

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

VIDEO SETUP

TV TYPE:

16:9

 

LINE:

16:9

 

PAUSE MODE:

4:3 LETTER BOX

 

 

4:3 PAN SCAN

 

7 Press X/x to select the setting that matches your TV type.xIf you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode

[16:9] (page 48)

xIf you have a 4:3 standard TV

[4:3 LETTER BOX] or [4:3 PAN SCAN] (page 48)

8 Press .

The Setup Display for selecting the output method for video signals from the EURO AV T OUTPUT (TO TV) jack on the rear panel of the unit appears.

VIDEO SETUP

TV TYPE:

16:9

LINE:

VIDEO

PAUSE MODE:

VIDEO

 

RGB

9 Press X/x to select the output method for video signals.

• [VIDEO]: outputs video signals.

Started Getting

21GB