Symptom

Remedy

The surround effect is difficult to

• Make sure the “DEC. MODE” setting (page 26).

hear when you are playing a

• Check the speaker connections and settings (pages 14, 51).

sound track of Dolby Digital,

• Depending on the DVD, the output signal may not be the entire 5.1 channel. It

DTS, or MPEG audio.

may be monaural or stereo even if the sound track is recorded in Dolby Digital

 

or MPEG audio format.

 

 

The sound comes from the center

• Depending on the disc, the sound may come from the center speaker only.

speaker only.

 

 

 

No sound is heard from the

• Check the speaker connections and settings (pages 14, 51).

center speaker.

• Make sure the “DEC. MODE” setting (page 26).

 

• Depending on the source, the effect of the center speaker may be less

 

noticeable.

 

• A 2 channel source is being played.

 

 

No sound or only a very low-

• Check the speaker connections and settings (pages 14, 51).

level sound is heard from the

• Make sure the “DEC. MODE” setting (page 26).

surround speakers.

• Depending on the source, the effect of the surround speakers may be less

 

noticeable.

 

• A 2 channel source is being played.

 

 

There is no sound from the

• The sampling frequency of the input signal is more than 48 kHz.

DIGITAL IN COAXIAL/

 

OPTICAL jack.

 

 

 

Operation

 

 

 

Symptom

Remedy

 

 

Radio stations cannot be tuned

• Check that the antenna (aerial) is connected securely. Adjust the antenna

in.

(aerial) or connect an external antenna (aerial) if necessary.

 

• The signal strength of the stations is too weak (when tuning in with automatic

 

tuning). Use direct tuning.

 

• No stations have been preset or the preset stations have been cleared (when

 

tuning by scanning preset stations). Preset the stations (page 54).

 

• Press DISPLAY so that the frequency appears in the front panel display.

 

 

Noise is heard on AM radio.

• Check the location of the AM loop antenna (aerial) and cord (page 18).

 

 

The remote does not function.

• There are obstacles between the remote and the unit.

 

• The distance between the remote and the unit is too far.

 

• The remote is not pointed at the remote sensor on the unit.

 

• The batteries in the remote are weak.

 

 

The disc does not play.

• There is no disc inserted.

 

• The disc is upside down.

 

Insert the disc with the playback side facing down.

 

• The disc is skewed on the disc tray.

 

• The system cannot play CD-ROMs, etc. (page 5).

 

• The region code on the DVD does not match the system.

 

• Moisture has condensed inside the unit and may cause damage to the lenses.

 

Remove the disc and leave the unit turned on for about half an hour.

 

 

88GB