16 Unplug the calibration mic and press C/cto select [YES].

Note

•The environment of the room in which the system is installed may affect measurements.

•If measurement fails, follow the message then retry [AUTO CALIBRATION].

17 Press .

Quick Setup is finished. All connections and setup operations are complete.

To quit the Quick Setup

Press DISPLAY in any Step.

Tip

•If you change the position of the speakers, reset the speaker settings. See “Getting Optimal Surround Sound for a Room” (page 76) and “Calibrating the Appropriate Settings Automatically” (page 77).

•If you want to change any of the settings, see “Using the Setup Display” (page 47).

To recall the Quick Setup display1 Press FUNCTION +/– repeatedly until“DVD” appears in the front panel display.2 Press DISPLAY while the system is in stop mode.

The Control Menu display appears on the TV screen.

3 Press X/x to select [SETUP], then press .

The options for [SETUP] appear.

94( 99)

1(

1)

DVD VIDEO

T

0: 01: 08

 

CUSTOM

CUSTOM

QUICK

4 Press X/x to select [QUICK], then press

.

The Quick Setup display appears.

Setting the type of video output to match your TV

Depending on the connection of the TV

(page 15), select the type of video output of the system.

To select the type of video signal output from the HDMI OUT jack

When you connect the unit and the TV with the HDMI cable, select the type of video signals output from the HDMI OUT jack.

For details, refer also to the operating instructions supplied with the TV/projector, etc.

1 Press FUNCTION +/– repeatedly until

“DVD” appears in the front panel display.

2 Press DISPLAY while the system is in stop mode.

The Control Menu display appears on the TV screen.

3 Press X/x to select [SETUP], then press .

The options for [SETUP] appear.

4 Press X/x to select [CUSTOM], then press .

The Setup Display appears.

5 Press X/x to select [HDMI SETUP], then press .

The options for [HDMI SETUP] appear.

6 Press X/x to select [HDMIRESOLUTION], then press .7 Press X/x to select the desired setting, then press .

•[AUTO (1920 × 1080p)]: The system outputs the optimal video signal for the connected TV.

•[1920 × 1080i]: The system outputs 1920 × 1080i* video signals.

•[1280 × 720p]: The system outputs 1280 ×

720p* video signals.

•[720 × 480p]**: The system outputs 720 ×

480p* video signals.

*i: interlace, p: progressive

**Depending on the country model, [720 × 480/ 576p] may appear.

Started Getting

23GB