Checking the audio signal format

If you press AUDIO repeatedly during playback, the format of the current audio signal (PCM, Dolby Digital, DTS, etc.) appears as shown below.

xDVDExample:

Dolby Digital 5.1 channel

 

LFE (Low

Surround (L/R)

Frequency Effect)

1: ENGLISH DOLBY DIGITAL 3 / 2 .1

 

Front (L/R) +

L C

R

LFE

 

Center

 

LS

RS

 

Currently playing program format

Example:

Dolby Digital 3 channel

 

Surround

 

Front (L/R)

(Monaural)

 

1:SPANISH DOLBY DIGITAL 2 / 1

 

 

L

R

 

S

 

Currently playing program format

xDATA CD (DivX video file)/DATA DVD (DivX video file)

Example:

MP3 audio

1:MP3 128k

Bit rate

32GB
Selecting a playback area for a Super Audio CD

You can play the Super Audio CD (page 98) by selecting the playback area.

To select a playback area on a 2 channel + Multi-channel Super Audio CD

Some Super Audio CDs consist of a 2 channel playback area and a multi-channel playback area. You can select the playback area you want to listen to.

1 Press DISPLAY while the system is in stop mode.

The Control Menu display appears on the TV screen.

2 Press X/x to select [MULTI/ 2CH], then press .

The options for [MULTI/2CH] appear.

3 Press X/x to select the desired setting and press .

[MULTI]: You can play the multi-channel playback area.

[2CH]: You can play the 2 channel playback area.

Note

You cannot change the playback area during playback.

When the Super Audio CD does not have the multi- channel playback area, you cannot select the playback area.

To change a playback layer when playing a hybrid Super Audio CD

Some Super Audio CDs consist of a Super Audio CD layer and a CD layer. You can change the playback layer you want to listen to.

Note

When the Super Audio CD does not have the CD layer, you cannot select the playback layer.

1 Press DISPLAY while the system is in stop mode.