Sound transmission is established as follows (example):

This unit

 

Other S-AIR main

 

unit

ID A

 

ID B

 

 

 

 

 

ID A

 

 

ID A

 

ID B

 

 

 

 

 

 

 

 

S-AIR sub unit

S-AIR sub unit

S-AIR sub unit

Tip

•To confirm the current ID, perform Steps 1 to 7 above. When you pair the unit with the S-AIR sub unit (page 73), [(PAIRING)] appears beside ID on the display for selecting ID.

To set the ID of the surround amplifier

Refer to the operating instructions of the surround amplifier.

To set the ID of the S-AIR receiver

Refer to the operating instructions of the S-AIR receiver.

•It is easy to set the same ID for the unit and S-AIR sub unit to establish sound transmission. However, neighbors may also receive your system’s sound if IDs are the same, or you may receive the sound from neighbors. To prevent this, you can identify the unit with a specific S-AIR sub unit by performing the pairing operation (page 73).

Enjoying the system’s sound in another room

For the S-AIR receiver

You can enjoy the system’s sound by using the S-AIR receiver. The S-AIR receiver can be installed anywhere, regardless of the location of

the unit, for enjoying the system’s sound in another room.

For details of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver.

1 Set the ID of the S-AIR receiver to that of the unit.

•To set the ID of the unit, see “To set the ID of the unit” (page 71).

•To set the ID of the S-AIR receiver, refer to the operating instructions of the S-AIR receiver.

•When you are using another S-AIR sub unit, such as a surround amplifier, do not change the ID of the unit. Set the ID of the S-AIR receiver to the same ID as the unit.

•When you pair the unit and another S-AIR sub unit, such as a surround amplifier, by the pairing operation, you need to perform the pairing operation between the unit and the S-AIR receiver. For details, see “Identifying the unit with a specific S-AIR sub unit (Pairing operation)” (page 73).

2 Press S-AIR MODE on the remote.

The S-AIR mode appears in the front panel display. Each time you press S-AIR MODE, the S-AIR mode changes.

•“PARTY”: The S-AIR receiver outputs sound according to function set on the unit.

•“SEPARATE”: You can set the desired function for the S-AIR receiver while unit functions do not change.

3 Select the desired function on the S-AIR receiver.xWhen “PARTY” is set

The function changes in the same sequence as you press FUNCTION +/– (page 24).

xWhen “SEPARATE” is set

The function changes as follows.

“MAIN UNIT” t “TUNER FM” t “TUNER AM” t “DMPORT” t “AUDIO” t …

To enjoy the same function as the unit, select “MAIN UNIT.”

72GB