xWhen the current layer is the CD layer

[SUPER AUDIO CD] appears.

xWhen the current layer is the HD layer

[CD] appears.

3 Press to change the layer.

•[SUPER AUDIO CD]: You can play the HD layer.

When the system is playing an HD layer, “SA-CD” lights up in the front panel display

•[CD]: You can play the CD layer. When the system is playing a CD layer, “CD” lights up in the front panel display.

Note

•Each play mode function works only within the selected layer or playback area.

•When you select a CD layer, you cannot change a playback area.

•Super Audio CD audio signals are not output from the HDMI OUT jack.

Playing a VIDEO CD with PBC functions (Ver.2.0)(PBC Playback)

With PBC (Playback Control) functions, you can enjoy simple interactive operations, search functions, and other such operations.

PBC playback allows you to play a VIDEO CD interactively by following the menu on the TV screen.

1 Start playing a VIDEO CD with PBC functions.

The menu for your selection appears.

2 Select the item number you want using the number buttons.3 Press .4 Follow the instructions in the menu for interactive operations.

Refer to the operating instructions supplied with the disc, as the operating procedure may differ depending on the VIDEO CD.

To go back to the menu

Press O RETURN.

Note

•Depending on the VIDEO CD, [Press ENTER] in Step 3 may appear as [Press SELECT] in the operating instructions supplied with the disc. In this case, press H.

Tip

•To play without using the PBC function, press ./ > or the number buttons while the system is in stop mode to select a track, then press H or . The system starts playback. You cannot play still pictures such as a menu. To return to PBC playback, press x twice, then press H.

Resuming playback from the point where you stopped the disc(Resume Play)

When you stop the disc, the system remembers the point where you pressed x and “RESUME” appears in the front panel display. As long as you do not remove the disc, Resume Play will work even if the system is set to standby mode by pressing "/1.

1 While playing a disc, press x to stop playback.

“RESUME” appears in the front panel display.

2 Press H.

The system starts playback from the point where you stopped the disc in Step 1.

Note

•Depending on where you stop the disc, the system may not resume playback from exactly the same point.

•The point where you stopped playing may be cleared when:

–you eject the disc.

–the system enters standby mode (DATA CD/ DATA DVD only).

–you change or reset the settings on the Setup Display.

–you change the parental control level.

Disc

37GB