Sony DAV-HDX685 Using the Sleep Timer, To check the remaining time, To change the remaining time

Changing the Input Level of the Sound from Connected Components

Distortion may occur when you listen to a component connected to the TV/VIDEO jacks on the rear panel, or to the AUDIO IN jack on the front panel. Distortion is not a malfunction and will depend on the component connected. To prevent distortion, reduce the input level on the unit.

1 Press FUNCTION +/– repeatedly until “TV/VIDEO” or “AUDIO” appears in the front panel display.

2 Press SYSTEM MENU.

3 Press X/x repeatedly until “ATTENUATE” appears in the front panel display, then press or c.

4 Press X/x to select a setting.

•“ATT ON”: You can attenuate the input level. The output level is changed.

•“ATT OFF”: Normal input level.

5 Press .

The setting is made.

6 Press SYSTEM MENU.

The system menu turns off.

Using the Sleep Timer

You can set the system to turn off at a preset time, so you can fall asleep listening to music. You can preset the time in 1 or 10-minute increments.

Press SLEEP.

Each time you press SLEEP, the minutes display (the remaining time) changes by 10 minutes. When you set the sleep timer, “SLEEP” flashes in the front panel display.

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly to select the desired time.

To cancel the sleep timer function

Press SLEEP repeatedly until “SLEEP OFF” appears in the front panel display.

To set the sleep timer using the system menu

1 Press SYSTEM MENU.

2 Press X/x repeatedly until “SLEEP” appears in the front panel display, then press or c.

3 Press X/x to select a setting.

The minutes display (the remaining time) changes by 10 minutes.

Tip

•You can select the remaining time by pressing the number buttons. In this case, you can preset the time in 1-minute increments.

4 Press .

The setting is made and “SLEEP” flashes in the front panel display.

5 Press SYSTEM MENU.

The system menu turns off.

Other Operations

85GB