Sony DAV-HDX685 manual Does your TV accept progressive signals?, Getting Started

press .

The options for [HDMI SETUP] appear.

6 Press X/x to select [HDMI

RESOLUTION], then press .

7 Press X/x to select the desired setting, then press .

• [AUTO (1920 × 1080p)]: The system outputs the optimal video signal for the connected TV.

• [1920 × 1080i]: The system outputs 1920 × 1080i* video signals.

• [1280 × 720p]: The system outputs 1280 × 720p* video signals.

• [720 × 480p]**: The system outputs 720 × 480p* video signals.

* i: interlace, p: progressive

then press .

The options for [SETUP] appear.

Press X/x to select [CUSTOM], then press .

The Setup Display appears.

Press X/x to select [HDMI SETUP], then

Press DISPLAY while the system is in stop mode.

The Control Menu display appears on the TV screen.

Setting the type of video output to match your TV

Depending on the connection of the TV

(page 26), select the type of video output of the system.

To select the type of video signal output from the HDMI OUT jack

When you connect the unit and the TV with an HDMI cable, select the type of video signals output from the HDMI OUT jack.

For details, refer also to the operating instructions supplied with the TV/projector, etc.

1 Press FUNCTION +/– repeatedly until

“DVD” appears in the front panel display.

2

3 Press X/x to select [SETUP],

4

5

**Depending on the area, [720 × 480/576p] may appear.

Does your TV accept progressive signals?

Progressive is a method for displaying TV images which reduces flickering and sharpens the image. To use this method, you need to connect to a TV that accepts progressive signals.

1 Press FUNCTION +/– repeatedly until

“DVD” appears in the front panel display.

2 Press DISPLAY while the system is in stop mode.

The Control Menu display appears on the TV screen.

3 Press X/x to select [SETUP], then press .

The options for [SETUP] appear.

4 Press X/x to select [CUSTOM], then press .

The Setup Display appears.

5 Press X/x to select [VIDEO SETUP], then press .

The options for [VIDEO SETUP] appear.

6 Press X/x to select [PROGRESSIVE (COMPONENT OUT)], then press .

7 Press X/x to select the desired setting, then press .

[OFF]: The system does not output progressive signals. Select this setting when:

–your TV does not accept progressive signals, or,

–your TV is connected via jacks other than the COMPONENT VIDEO OUT jacks.

[ON]: The system outputs progressive signals. Select this setting when:

–your TV accepts progressive signals, and,

–the TV is connected via the

COMPONENT VIDEO OUT jacks. When you select [ON], the confirmation display appears. Follow the Steps below.

Getting Started

35GB