Sony DAV-HDX685 manual Performing the Quick Setup, Getting Started, Turn on the TV 2 Press /1

Step 3: Performing the Quick Setup

Follow the Steps below to make the basic adjustments for using the system. Displayed items vary depending on the area.

"/1

C/X/x/c,

DISPLAY

1 Turn on the TV.

2 Press [/1.

Note

•Make sure that the function is set to “DVD” (page 36).

3 Switch the input selector on your TV so that the signal from the system appears on the TV screen.

[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the TV screen. If this message does not appear, recall the Quick Setup display (page 34).

4 Press without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

LANGUAGE SETUP

OSD:ENGLISH

MENU:ENGLISH

AUDIO:FRENCH

SUBTITLE:SPANISH

PORTUGUESE

5 Press X/x to select a language, then press .

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

VIDEO SETUP

TV TYPE:		16:9
PROGRESSIVE (COMPONENT		16:9
4:3 OUTPUT:	4:3 LETTER BOX
BLACK LEVEL:	4:3 PAN SCAN
BLACK LEVEL (COMPONENT OUT):		OFF
PAUSE MODE:		AUTO

6 Press X/x to select the setting that matches your TV type, then press .

•[16:9]: For a wide-screen TV or a 4:3 standard TV with a wide-screen mode (page 60)

•[4:3 LETTER BOX] or [4:3 PAN SCAN]: For a 4:3 standard TV (page 60)

The Setup Display for the Control for HDMI function appears.

HDMI SETUP	AUTO(1920x1080p)
HDMI RESOLUTION:
CONTROL FOR HDMI:	ON
VOLUME LIMIT:	ON
YCBCR/RGB(HDMI):	OFF
AUDIO(HDMI):	OFF
JPEG RESOLUTION:	SD

7 Press X/x to select the setting, then press .

•[ON]: The Control for HDMI function (page 70) is set to on.

•[OFF]: The Control for HDMI function is set to off.

The Setup Display for selecting the speaker formation appears.

SPEAKER FORMATION

STANDARD

Getting Started

33GB