Sony DAV-HDX685 manual Installing the speakers on a wall, 22GB, Getting Started, DAV-HDX285

Getting Started

Installing the speakers on a wall

Caution

•Contact a screw shop or installer for information regarding the wall material or screws to be used.

•Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam. Install the speakers on a vertical and flat wall where reinforcement is applied.

•Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.

Before installing the speakers on a wall, connect the speaker cord to the speaker.

Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #.

Color tube

Front left speaker (L): White

Front right speaker (R): Red

Center speaker: Green

Surround left speaker (L): Blue

Surround right speaker (R): Gray

1 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below.

	4 mm (5/32 inch)		Hole on the back of
		5 mm	the speaker
		(7/ inch)
		32
30 mm (1	3/ inches)	10 mm
	16

(13/32 inch)

2 Fasten the screws to the wall.

DAV-HDX285

For the center speaker For the other speakers

8 to 10 mm (11/32 to 13/32 inch)

145 mm

(5 3/4 inches)

		8 to 10 mm
(11/	32	to 13/	32	inch)

22GB