Sony DAV-HDX685 manual ID setting, 75GB, To set the ID of the surround amplifier

Set the S-AIR sub unit to the same ID. Sound transmission is established as follows (example):

7

Press SYSTEM MENU. The system menu turns off.

6

Press .

The setting is made.

5

Press X/x to select the desired ID. You can select any ID (A, B, or C).

4

The system turns on.

2 Press SYSTEM MENU.

3 Press X/x repeatedly until “S-AIR ID” appears in the front panel display, then press or c.

Note

• When the wireless transmitter is not inserted in the unit, “S-AIR ID” cannot be selected.

Press "/1 on the unit.

1

To set the ID of the unit

•Do not insert anything other than the wireless transmitter into the EZW-T100 slot.

3 Make sure to use the same screws to secure the wireless transmitter.

Rear of the unit

SPEAKER

EZW-T100

SPEAKER	TV	COMPONENT VIDEO OUT	VIDEO	TV/VIDEO
	HDMI OUT		OUT
		DMPORT

Note

•Do not use other screws to fasten the wireless transmitter.

To insert the wireless transceiver into the S-AIR sub unit

For details on installing the wireless transceiver into the S-AIR sub unit, such as a surround amplifier or S-AIR receiver, see the operating instructions of the S-AIR sub unit.

Tip

•When you change the S-AIR configuration, Sony recommends that you perform [AUTO CALIBRATION]. For details, see “Calibrating the Appropriate Settings Automatically” (page 81).

Establishing sound transmission between the unit and S-AIR sub unit

(ID setting)

For the surround amplifier

For the S-AIR receiver

Simply by matching the ID of the unit and the S-AIR sub unit, you can establish sound transmission.

S-AIR main unit
(This unit)
	ID A
ID A	ID A
S-AIR sub unit	S-AIR sub unit
Tip

•To confirm the current ID, perform Steps 1 to 3 above. When you pair the unit with the S-AIR sub unit (page 77), “(PAIRING)” appears beside ID in the front panel display.

To set the ID of the surround amplifier

Refer to the operating instructions of the surround amplifier.

Control for HDMI/External Audio Device

75GB