Sony DAV-HDX685 manual 97GB, S-AIR function

Symptom	Remedy
The Control for HDMI function	• When “HDMI” does not light up in the front panel display, check the HDMI
does not work.	connection (page 26).
	• Set [CONTROL FOR HDMI] in [HDMI SETUP] to [ON] (page 62).
	• Make sure that the connected component is compatible with the [CONTROL
	FOR HDMI] function.
	• Check that the AC power cord (mains lead) of the connected component is
	connected securely.
	• Check the connected component’s setting for the Control for HDMI function.
	Refer to the operating instructions supplied with the component.
	• If you change the HDMI connection, connect and disconnect the AC power
	cord (mains lead), or have a power failure, set [CONTROL FOR HDMI] in
	[HDMI SETUP] to [OFF], then set [CONTROL FOR HDMI] in [HDMI
	SETUP] to [ON] (page 62).
	• For details, see “Using the Control for HDMI Function for “BRAVIA” Sync”
	(page 70).
No sound is output from the	• Set [AUDIO (HDMI)] in [HDMI SETUP] to [ON] (page 62).
system and TV while using the	• Make sure that the connected TV is compatible with the System Audio Control
System Audio Control function.	function.
	• For details, see “Using the Control for HDMI Function for “BRAVIA” Sync”
	(page 70).
The S-AIR function
Symptom	Remedy
S-AIR connection is not	• If you use another S-AIR main unit, place it more than 8 m (about 25 feet) away
established (sound transmission	from the S-AIR main unit you are using.
is not established), e.g., the	• Confirm the S-AIR IDs of the unit and S-AIR sub unit (page 75).
indicator of the S-AIR sub unit	• Another S-AIR sub unit is paired to the S-AIR main unit. Pair the desired S-AIR
does the following:	sub unit with the S-AIR main unit (page 77).
• Turns off.	• Place so that the S-AIR main unit and S-AIR sub unit are separated from other
• Flashes.	wireless devices.
• Turns red.	• Avoid using any other wireless devices.
	• The S-AIR sub unit is turned off. Make sure the AC power cord (mains lead) is
	connected and turn on the S-AIR sub unit.
No sound is heard from the	• If you use another S-AIR main unit, place it more than 8 m (about 25 feet) away
S-AIR sub unit.	from the S-AIR main unit you are using.
	• Confirm the S-AIR IDs of the unit and S-AIR sub unit (page 75).
	• Confirm the pairing setting (page 77).
	• Place so that the S-AIR main unit and S-AIR sub unit closer together.
	• Avoid use of equipment that generates electromagnetic energy, such as a
	microwave oven.
	• Place so that the S-AIR main unit and S-AIR sub unit are separated from other
	wireless devices.
	• Avoid using any other wireless devices.
	• Change the “RF CHANGE” setting (page 78).
	• Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit.
	• Turn off the system and S-AIR sub unit, then turn on them.

Additional Information

97GB