Note
• When you adjust the speaker settings, the sound cuts off for a moment.
• The test tone signals are not output from the HDMI OUT jack.
Press X/x repeatedly to select [TEST
TONE], then press .
Press when you have finished making adjustments.
8
9
10 Press X/x repeatedly to select [OFF], then press .
From your listening position, adjust the value of [LEVEL (FRONT)] or [LEVEL (SURROUND)] using C/X/x/c.
The test tone is emitted from only the speaker which you are adjusting.
7
c.
5 Press X/x repeatedly to select [TEST TONE], then press or c.
6 Press X/x repeatedly to select [ON], then press .
You will hear the test tone from each speaker in sequence.
or
press .
The Setup Display appears.
4 Press X/x repeatedly to select [SPEAKER SETUP], then press
then press .
The options for [SETUP] appear.
3 Press X/x to select [CUSTOM], then
[SETUP],
in stop mode.
The Control Menu appears.
2 Press X/x to select
1 Press DISPLAY when the system is
Placing the surround speaker(L) in the (R) position

Depending on the location of the wall outlet (mains), you can also place the surround speaker

(L)(with the IR receiver) in the (R) position if necessary.

X/x/c,

AMP MENU

With the cover opened.

1 Press AMP MENU.

2 Press X/x repeatedly until “SL SRREVERSE” appears in the front paneldisplay, then press or c.3 Press X/x to select the setting.

The default setting is underlined.

•OFF: Sets the surround speaker (L) (with the IR receiver) in the (L) position.

•ON: Sets the surround speaker (L) (with the IR receiver) in the (R) position.

4

5

Press .

Press AMP MENU.

The AMP menu turns off.

100GB