Sony DAV-LF1H 31GB, cto select [YES], To quit the Quick Setup, – BASIC – Started Getting, To recall the Quick Setup display, 13 Unplug the calibration mic and press C

•When you install the surround speaker (L) to the right position, the system sets the “SL SR REVERSE” setting (page 100) to “ON” automatically.

13 Unplug the calibration mic and press C/cto select [YES].

Quick Setup is finished. All connections and setup operations are complete.

Measurement complete.
FRONT L :	4.8m	0.0dB
FRONT R :	4.8m	0.0dB
CENTER :	4.8m	+ 1.0dB
SUBWOOFER :	4.8m	+ 4.0dB
SURROUND L :	3.0m	- 2.0dB
SURROUND R :	3.0m	- 2.0dB

If OK, unplug calibration mic and select

“YES”. YES NO

Note

•Reflections from walls or the floor may affect measurements.

•If measurement fails, follow the message then retry [AUTO CALIBRATION].

To quit the Quick Setup

Press DISPLAY in any Step.

Tip

•If you cancel [AUTO CALIBRATION], perform the speaker settings in “Settings for the Speakers” (page 98).

•If you change the position of the speakers, reset the speaker settings. See “Calibrating the Appropriate Settings Automatically” (page 88).

•If you want to change any of the settings, see “Using the Setup Display” (page 91).

•For details on [AUTO CALIBRATION] and the error messages of [AUTO CALIBRATION], see “Calibrating the Appropriate Settings Automatically” (page 88).

To recall the Quick Setup display

1Press DISPLAY when the system is in stop mode.

The Control Menu appears.

2Press X/x to select [SETUP], then press .

The options for [SETUP] appear.

1 2 ( 2 7 )

1 8 ( 3 4 )		DVD VIDEO
T	0 : 0 0 : 0 2

QUICK

QUICK

CUSTOM

RESET

3Press X/x to select [QUICK], then press .

The Quick Setup display appears.

– BASIC – Started Getting

31GB