Installing the IR Transmitter and the IR Receiver on a Wall

You can hang the IR transmitter and IR receiver on a wall when:

there is an obstruction between the IR transmitter and the IR receiver.

people often pass between the IR transmitter and the IR receiver.

When hanging both the IR transmitter and IR receiver, adjust the position of the IR transmitter after deciding the position of the IR receiver.

Installing the IR transmitter on a wall

1Rotate the stand of the IR transmitter.

IR transmitter

Stand

2Install 2 commercially available screws in the wall so that it protrudes 4 mm.

Install the screws 30 mm apart.

30 mm

5 – 7 mm

4 mm

3Hang the IR transmitter via hole on the bottom of the stand on the screw.

Make sure that the IR transmitter does not move after installation.

IR transmitterGetting Started–Stand ADVANCED –

Tip

You can store the cords in the troughs in the bottom of the stand.

Stand

Troughs

Note

Use screws suitable for the material and strength of the wall.

Do not install the IR transmitter to a wall of low strength.

Sony is not liable for any damage or accident incurred by incorrect installation (i.e. low strength wall, etc.), incorrect use of this product, or natural disaster.

When connecting/disconnecting the cord, detach the IR transmitter from the wall first.

continued

33GB