Center

Speaker system

Closed, magnetically

 

shielded

Speaker unit

Woofer: 70 × 120 mm

 

dia. cone type

 

Tweeter: 25 mm dome

 

type

 

Rated impedance

4.0 ohms

Dimensions (approx.)

545

× 105 × 35 mm

 

(w/h/d)

 

545

× 116 × 60 mm

 

(w/h/d) with stand

Mass (approx.)

1.9 kg

 

2.1 kg with stand

Subwoofer

 

 

Speaker system

Bass reflex, magnetically

 

shielded

Speaker unit

150 mm cone type

Rated impedance

1.5 ohms

Dimensions (approx.)

188

× 573 × 318 mm

 

(w/h/d)

Mass (approx.)

14.5 kg

Power requirements

220

– 240 V AC, 50/60 Hz

Power consumption

130

W

 

0.3 W (at the Power Saving

 

mode)

Control unit

 

 

Dimensions (approx.)

570

× 168 × 56 mm

 

(w/h/d)

 

570

× 188 × 99 mm

 

(w/h/d) with stand

Mass (approx.)

4.2 kg

 

4.7 kg with stand

AC adaptor

 

 

Power requirements

220

– 240 V AC, 50/60 Hz

Power consumption

45 W

Dimensions (approx.)

219

× 44 × 82 mm

 

(w/h/d)

Mass (approx.)

0.7 kg

Design and specifications are subject to change without notice.

Unpacking

•Control unit (1)

•Speakers (5)

•Subwoofer (1)

•AC adaptor (1)

•AM loop antenna (aerial) (1)

•FM wire antenna (aerial) (1)

•Speaker cords (5 m ⋅ 2, 3.5 m ⋅ 1, 10 m ⋅ 1)

•Remote Commander (remote) (1)

•R6 (size AA) batteries (2)

•Calibration mic (1)

•Posts (4)

•Bases (4)

•Speaker adaptors (4)

•Speaker adaptor covers (4)

•Cord clamp (1)

•Adjuster (1)

•Center speaker base (1)

•Control unit stand (1)

•Control unit stand cover (1)

•Screws (24)

•IR transmitter (1)*

•IR receiver (1)**

•IR receiver stand (1)**

•Operating Instructions

•Quick Start Guide (card) (1)

*The IR receiver cord and IR transmitter are for this system only. You cannot use a commercially available extension cord.

**Used when the IR receiver of the surround speaker

(L) cannot receive infrared ray because of the position. For details, see “Using the IR Receiver” (page 32).

Information Additional

109GB