Settings for the Display

[SCREEN SETUP]

Choose settings according to the TV to be connected.

Select [SCREEN SETUP] in the Setup Display. To use the display, see “Using the Setup Display” (page 91).

The default settings are underlined.

SCREEN SETUP

TV TYPE:

16:9

HDMI RESOLUTION:

AUTO

YCBCR/RGB (HDMI):

YCBCR

SCREEN SAVER:

ON

BACKGROUND:

JACKET PICTURE

LINE:

VIDEO

4:3 OUTPUT:

FULL

x[TV TYPE]

Selects the aspect ratio of the connected TV (4:3 standard or wide).

[16:9]

Select this when you connect a

 

wide-screen TV or a TV with a

 

wide mode function.

 

 

[4:3 LETTER

Select this when you connect a 4:3

BOX]

screen TV. Displays a wide picture

 

with bands on the upper and lower

 

portions of the screen.

 

 

[4:3 PAN SCAN] Select this when you connect a 4:3 screen TV. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.

[16:9]

[4:3 LETTER BOX]

[4:3 PAN SCAN]

Note

•Depending on the DVD, [4:3 LETTER BOX] may be selected automatically instead of [4:3 PAN SCAN] or vice versa.

x[HDMI RESOLUTION]

Selects the type of video signals output from the HDMI OUT (high-definition multimedia interface out) jack. When you select [AUTO] (default), the system outputs video signals of the highest resolution acceptable for your TV.

If the picture is not clear, natural or to your satisfaction, try another option that suits the disc and your TV/projector, etc. For details, refer also to the instruction manual supplied with the TV/projector, etc.

[AUTO]

Normally, select this.

 

 

 

[1920

× 1080i*]

Sends 1920 × 1080i video signals.

 

 

 

[1280

× 720p*]

Sends 1280 × 720p video signals.

 

 

[720 × 480p*]

Sends 720 × 480p video signals.**

* i: interlace, p: progressive

Advanced

 

** Depending on the country, [720 × 480/576p] may

 

appear.

 

 

 

Settings

the

system automatically adjusts the video signals

Note

 

 

 

• Even when a setting other than [AUTO] is selected

 

and the connected TV cannot accept the resolution,

 

that are suitable for the TV.

and

• When the HDMI indicator on the front panel lights

up, images from the S VIDEO OUT jack is enlarged

Adjustments

 

vertically. (Except when [720 × 480p] is selected.)

 

x [YCBCR/RGB (HDMI)]

 

Selects the type of HDMI signal output from

 

HDMI OUT jack.

 

 

 

 

[YCBCR]

Outputs YCBCR signals.

 

 

 

 

[RGB]

Outputs RGB signals.

 

 

 

 

 

Note

•If the playback picture becomes distorted, set [YCBCR] to [RGB].

•If the HDMI OUT jack is connected to equipment with a DVI jack, [RGB] signals will be automatically output even when you select [YCBCR].

continued

93GB