Getting Started

Unpacking

Check that you have the following items:

•Speakers (5)

•Subwoofer (1)

•Surround amplifier (1)

•Speaker cord cover (1)

•Speaker cord holder (1)

•Screw (1)

•IR transmitter* (1)

•IR receiver* (1)

•IR receiver stand (1)

•AM loop antenna (aerial) (1)

•FM wire antenna (aerial) (1)

• Speaker cords (3.5m ⋅ 3, 5m ⋅ 2)

•Remote Commander (remote) RM-SP240 (1)

•Size AA (R6) batteries (2)

•Foot pads (4)

•Operating Instructions

•Speakers-connection and Installation (card)

(1)

*The cords of the IR transmitter and IR receiver are for this system only. You cannot use a commercially available extension cord.

Inserting Batteries into

 

 

 

 

the Remote

 

Getting

You can control the system using the supplied

remote. Insert two size AA (R6) batteries by

Started

 

matching the 3 and # ends on the batteries to

 

the markings inside the compartment. When

 

using the remote, point it at the remote sensor

 

on the system.

 

Notes

•Do not leave the remote in an extremely hot or humid place.

•Do not use a new battery with an old one.

•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a malfunction.

•If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

11GB