Sony DAV-SB500W wall, 25GB, Started Getting, To hang the IR transmitter on a, To hang the IR receiver on a wall, in the wall so that it protrudes 4 mm

Hanging the IR transmitter and IR receiver on a wall

You can hang the IR transmitter and IR receiver on a wall when:

–there is an obstruction between the IR transmitter and the IR receiver.

–people often pass between the IR transmitter and the IR receiver.

When hanging both the IR transmitter and IR receiver, adjust the position of the IR transmitter after deciding the position of the IR receiver.

To hang the IR receiver on a wall	To hang the IR transmitter on a
1 Install a commercially available screw	wall
in the wall so that it protrudes 4 mm.	1 Rotate the stand of the IR transmitter.
	IR transmitter

4 mm

Started Getting

2 Detach the IR receiver stand and hang it via hole on the rear side of the IR receiver on the screw.

Make sure that the IR receiver does not move after installation.

IR receiver

Stand

2 Install 2 commercially available screws in the wall so that it protrudes 4 mm.

Install the screws 30 mm apart.

30 mm

4 mm

IR receiver stand

Tip

When reattaching the IR receiver stand to the IR receiver, attach the stand so that both delta marks on the IR receiver and stand are aligned (page 13).

continued

25GB