then press ENTER.
Note
When you adjust the speaker settings, the sound cuts off for a moment.
Tip
To adjust the balance or the level without listening to the test tone, select [BALANCE] or [LEVEL] in step 3 and press ENTER. Then adjust the balance or level using X/x and press ENTER.
Press X or x repeatedly to select [OFF],
Press X or x repeatedly to select [TEST
TONE], then press ENTER.
6 Press ENTER when you have finished making adjustments.
7
8
From your listening position, adjust the value of [BALANCE] and [LEVEL] using C/X/x/c.
When selecting [BALANCE], the test tone is emitted from both left and right speakers simultaneously.
When selecting [LEVEL], the test tone is emitted from only the speaker which you are adjusting.
5
then press ENTER.
You will hear the test tone from each speaker in sequence.
Press X or x repeatedly to select [ON],
The Setup Display appears.
Press DVD SETUP in stop mode.
1
2 Press X or x repeatedly to select [SPEAKER SETUP], then press ENTER.
3 Press X or x repeatedly to select [TEST
TONE], then press ENTER.
4
Adjusting the speaker balance and level by using the test tone
xLEVEL

You can vary the level of each speaker as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

CENTER

0dB

(appears when you set [CENTER] to [YES] in the [SIZE] setting.)

Adjusts the level of the center speaker (–6 dB to +6 dB, 1 dB increments).

SURROUND

Adjusts the level of the surround

LEFT 0 dB

speakers (–6 dB to +6 dB, 1 dB

SURROUND

increments).

RIGHT 0 dB

 

(appears when

 

you set

 

[SURROUND] to

 

[YES] in the

 

[SIZE] setting.)

 

 

 

SUBWOOFER

Adjusts the level of the subwoofer

+4 dB

(–6 dB to +6 dB, 1 dB increments).

 

 

*When you perform the Quick Setup (page 27), the default settings are changed.

xBALANCE

You can vary the balance of the left and right speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment.

FRONT

(CENTER)

Adjusts the balance between the front left and right speakers. The center position is shown as “---”. (You can adjust from the center 6 steps left or right.)

To adjust the volume of all the speakers at one time

Use the VOLUME control on the system, or press VOLUME +/–.

xTEST TONE

The speakers will emit a test tone to adjust [LEVEL] and [BALANCE].

OFF The test tone is not emitted from the speakers.

ON The test tone is emitted from both left and right speakers simultaneously while adjusting balance. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence.

76GB