IBM T400F manual The following procedure describes how to reattach a leader pin

The following procedure describes how to reattach a leader pin.

To reattach a leader pin by using the IBM Leader Pin Reattachment Kit:

1. Attach the leader pin attach tool (		in Figure 20) to the cartridge		so that
the tool’s hook	latches into the cartridge’s door		. Pull the tool back to

hold the door open, then slide the tool onto the cartridge. Open the tool’s pivot

arm .

Figure 20. Attaching the leader pin attach tool to the cartridge. To hold the cartridge door open, hook the tool into the door and pull the tool back.

58IBM TotalStorage LTO Ultrium 2 Tape Drive