Installing a firmware card
Note: Firmware and flash memory cards offered for other Lexmark printers cannot be used with your printer.
Warning: Firmware and flash memory cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card.
Pins
What do I do now?
Follow the instructions in this section to install an optional firmware or flash memory card.
Only one of each type of card is supported.
1 Remove the system board access cover (see Page 22).
2 Unpack the card.
Avoid touching the metal pins on the bottom of the card. Save the packaging.
3 Holding the card by its sides, align the pins on the card with the holes on the system board.
4 Push the card firmly into place.
The entire length of the connector on the card must touch the system board.
Be careful not to damage the card connectors.
Task | Go to page… |
|
|
Installing a hard disk | 26 |
|
|
Installing an option card | 28 |
|
|
Replacing the system board access cover | 30 |
|
|
Install memory, firmware, or option cards
25
