Installing a memory card
Note: Some memory options offered for other Lexmark printers cannot be used with your printer. Refer to the publications CD for memory specifications.
Warning: Memory cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card.
Latch
Notch
Connection points
Follow the instructions in this section to install a printer memory card. Memory cards must have
1 Remove the system board access cover (see Page 22).
2 Unpack the memory card.
Avoid touching the connection points along the edge of the card. Save the packaging.
3 Push open the latches on both ends of the memory connector.
4 Align the notches on the bottom of the card with the notches on the connector.
5 Push the memory card firmly into the connector until the latches on either end of the connector snap into place.
It may require some force to fully seat the card.
6 Make sure each latch fits over the notch on the end of the card.
What do I do now?
Task | Go to page… |
|
|
Installing a firmware card | 25 |
|
|
Installing a hard disk | 26 |
|
|
Installing an option card | 28 |
|
|
Replacing the system board access cover | 30 |
|
|
Install memory, firmware, or option cards
24
