Lexmark 752 setup guide Attach cables and power cord

2 Plug one end of the printer power cord into the socket at the back of the printer and the other end into a properly grounded outlet.

If you installed an optional 2000-sheet drawer, plug the printer power jumper cord into the back of the drawer, and then plug the drawer’s cord into a properly grounded outlet.

3 Turn on your printer.

After the printer completes its internal tests, the Ready message indicates that the printer is ready to receive jobs.

If you see a message other than Ready on the display, refer to the publications CD for instructions on clearing the message. Look for information about understanding printer messages.

4 Go on to “Install drivers for local printing” on page 44.

Attach cables and power cord

40