Lexmark 752 setup guide Attaching a network cable, Ethernet

Attaching a network cable

Ethernet

You can attach your printer to a network using standard network cables.

A 10BaseT/100BaseTx Fast Ethernet port is standard on the network model.

To attach the printer to a network:

1 Make sure the printer is turned off and unplugged.

2 Connect the printer to a LAN drop or hub using standard cabling that is compatible with your network. The printer automatically adjusts for the network speed.

Use Category 5 cable with an RJ-45 connector for the standard network port.

3 Plug one end of the printer power cord into the socket at the back of the printer and the other end into a properly grounded outlet.

If you installed an optional 2000-sheet drawer, plug the printer power jumper cord into the back of the drawer, and then plug the drawer’s cord into a properly grounded outlet.

Attach cables and power cord

42