Installing an option card
Your printer has one expansion card slot that supports a number of option cards. The following table describes their function.
Card | Function |
MarkNet internal print server | Adds an Ethernet or |
| network. |
| Install a MarkNet™ N2501e or N2401e internal print server if you received |
| either of these cards as part of a multifunction printer upgrade. |
|
|
Parallel | Adds a parallel port. |
|
|
Coax/Twinax Adapter for SCS | Adds a coaxial/twinaxial port. |
|
|
Serial Interface Card | Adds a serial port. |
|
|
Note: The network models ship with an Ethernet print server already installed.
You need a small Phillips screwdriver to install these options.
1 Remove the system board access cover (see Page 22).
2 Remove the screw from the metal plate that covers the connector slot, and then lift the plate off.
Save the screw.
Warning: Option cards are easily damaged by static | 3 Unpack the option card. | |
electricity. Touch something metal on the printer before | Save the packing materials. | |
you touch an option card. | ||
|
Install memory, firmware, or option cards
28
