6 Close the front cover.
Warning: If the front cover does not close completely, reopen the cover and press in firmly on the cartridges to make sure they are fully seated.
Attaching an adhesive operator panel overlay
If English is not your preferred language and your printer shipped with an adhesive operator panel overlay, attach the overlay that has the appropriately translated button names:
1 Locate the adhesive overlay packaged with your printer.
2 Peel the protective backing off the overlay.
3 Align the holes in the overlay with the buttons on the operator panel, and then press it into place.
4 Peel the protective covering away from the overlay.
Set up the print supplies
19
