IBM T400F manual Measurement, Physical Specifications, Power Specifications

Chapter 2. Specifications

Table 4 gives the physical, power, and environmental specifications for the IBM TotalStorage LTO Ultrium 2 Tape Drive. Specifications for tape cartridges are given in “Environmental and Shipping Specifications for Tape Cartridges” on page 62.

Table 4. Specifications for the IBM TotalStorage LTO Ultrium 2 Tape Drive

Specification	Measurement
	Physical Specifications
Width	146.0 mm (5.75 in.) without bezel
	148.3 mm (5.84 in.) with bezel
Length	205.5 mm (8.09 in.) without bezel
	210.5 mm (8.29 in.) with bezel
Height	82.5 mm (3.25 in.) without bezel
	84.8 mm (3.34 in.) with bezel
Weight (without a cartridge)	3 kg (6 lb 10 oz)

Power Specifications

	Drive with Ultra160 SCSI Interface	Drive with Fibre Channel Interface
Tolerance (see Note 1)	+ 5 Vdc and + 12 Vdc (±10%)	+ 5 Vdc and + 12 Vdc (±10%)
Power supply current for 5	1.3 A minimum	1.9 A minimum
Vdc (see Note 2)
	3.1 A maximum	3.7 A maximum
Power supply current for 12	0.2 A minimum	0.2 A minimum
Vdc (see Note 2)
	1.1 A maximum	1.1 A maximum
Power supply peak for 5	3.3 A for 100 ms	3.9 A for 100 ms
Vdc (the instantaneous	15.5 W	19.5 W
power by the power supply)
Power supply peak for 12	4.1 A for 2 ms	4.1 A for 2 ms
Vdc (the instantaneous	49.2 W	49.2 W
power by the power supply)
Power usage for typical idle	10.9 W	13.9 W
mode with no cartridge
Power usage for typical idle	12.7 W	15.7 W
mode with a cartridge
loaded
Power usage for reading	29 W	32 W
and writing at 6.22 m/s
Power usage for sleep	9.0 W	12.0 W
mode with no cartridge
Power usage for sleep	10.8 W	13.8 W
mode with a cartridge
loaded
	Other Specifications (for both interface types)
Maximum altitude	3048 m (10,000 ft) for operating and storage
	12192 m (40,000 ft) for shipping
Extraction force	250 to 750 gms-force

© Copyright IBM Corp. 2002 11