IBM T400F manual Manually rotate the loader motor gear see

9.While keeping the tape taut with your fingers, rotate the allen wrench clockwise to wind the excess tape into the cartridge. Guide the leader pin toward the

cartridge and drop it inside the cartridge door. Ensure that no tape is left outside of the cartridge. Remove the allen wrench.

Note: Do not attempt to seat the leader pin into the cartridge’s clips; this will interfere with the motion of the leader block.

10. Manually rotate the loader motor gear (see	in Figure 33) in the unload
direction (counterclockwise) until the leader block		reaches the last roller
.

11. While manually rotating the loader motor gear in the unload direction, guide the

end of the leader block into the white guide block .

Figure 33. Guiding the leader block into the home position

Chapter 7. Servicing 91