Table 4. Specifications for the IBM TotalStorage LTO Ultrium 2 Tape Drive (continued)
Environmental Specifications (for both interface types)
Environmental Factor | Operating | Storage | Shipping | |
(see Note 3) | ||||
|
|
| ||
|
|
|
| |
Drive temperature | 10 to 40°C | 1 to 60°C | −40 to 60°C | |
(50 to 104°F) | (33.8 to 140°F) | (−40 to 140°F) | ||
| ||||
|
|
|
| |
Relative humidity | 20 to 80% | 10 to 90% | 10 to 90% | |
(noncondensing) | ||||
|
|
| ||
|
|
|
| |
Wet bulb temperature | 26°C | 26°C | 26°C | |
(78.8°F) | (78.8°F) | (78.8°F) | ||
| ||||
|
|
|
|
Notes:
1. Measured at the drive’s power connector.
2. The + 5 Vdc and + 12 Vdc maximum currents do not occur simultaneously. The Ultrium 2 Tape Drive monitors voltage and reports problems to the server.
3. Measured in front of the bezel, near the air intake area (refer to Figure 4 on page 16).
