The surround effect is difficult to hear when you are playing a Dolby Digital, DTS, or MPEG audio sound track.
•Make sure the sound field function is on (page 52).
•Check the speaker connections and settings (pages 29, 75).
•Depending on the DVD, the output signal may not be the entire 5.1 channel. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format.
The sound comes from the center speaker only.•Depending on the disc, the sound may come from the center speaker only.
No sound is heard from the center speaker.•Check the speaker connections and settings.
•Make sure the sound field function is on (page 52).
•Depending on the source, the effect of the center speakers may be less noticeable.
No sound or only a very•Check the speaker connections and settings (pages 29, 75).
•Make sure the sound field function is on (page 52).
•Depending on the source, the effect of the surround speakers may be less noticeable.
•Wireless setting of the surround speaker is not correct (page 23).
•The plasma display may interfere with transmission, in which case, adjust the position of the IR transmitter and IR receiver (page 23).
•Do not install the IR receiver in a place exposed to direct sunlight or strong light such as an incandescent lamp.
•Clean the surface of the IR transmitter and IR receiver.
Operation
Radio stations cannot be tuned in.•Check that the antennas (aerials) are connected securely. Adjust the antenna (aerial) or connect an external antenna (aerial) if necessary.
•The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning.
•No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 66).
• Press DISPLAY so that the frequency appears in
the display. |
| ||
|
|
| |
| The remote does not function. |
| ||
• There are obstacles between the remote and the |
| ||
system. |
| ||
• The distance between the remote and the system is |
| ||
too far. |
| ||
• The remote is not pointed at the remote sensor on |
| ||
the system. |
| ||
• The batteries in the remote are weak. |
| ||
|
|
| |
| The POWER/ON LINE indicator momentarily |
| ||
| turns red. |
| ||
• When playing an MP3 or DVD disc, or when |
| ||
changing a disc, the indicator momentarily turns |
| ||
red. This is not a malfunction. |
| ||
|
|
| |
| The POWER/ON LINE indicator flashes in red. |
| ||
• Move the wireless system away from any other |
| ||
nearby wireless system(s). |
| ||
• Point the IR transmitter at the IR receiver. |
| ||
Additional | |||
|
| ||
Insert the disc with the playback side facing down | |||
| The disc does not play. |
| ||
• There is no disc inserted. |
| ||
• The disc is upside down. | Information | ||
system. | |||
on the disc tray. |
| ||
• The disc is skewed on the disc tray. |
| ||
• The system cannot play |
| ||
• The region code on the DVD does not match the |
| ||
• Moisture has condensed inside the system. |
| ||
Remove the disc and leave the system turned on |
| ||
for about half an hour (page 3). |
| ||
•The DATA CD is not recorded in an MP3 format that conforms to ISO9660 Level 1/Level 2 or Joliet.
•The MP3 audio track does not have the extension “.MP3.”
•The data is not formatted in MP3 even though it has the extension “.MP3.”
•The system can only play MP3 (MPEG1 Audio Layer3) audio.
•Set [DATA CD PRIORITY] to [MP3] in the [CUSTOM SETUP] setting (page 74).
•Directory level is more than 8.
•The disc contains more than 99 albums (the maximum number of MP3 audio tracks that can be contained on an album is 250).
continued