3Connecting the Antenna (Aerial)To connect the AM loop antenna (aerial)

Plastic stand (supplied)

Antenna (aerial)

The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle or roll up the antenna (aerial).

1 Remove only the loop part from the plastic stand. 2 Set up the AM loop antenna (aerial).

3 Connect the cords to the AM terminals.Cord (A) or cord (B) can be connected to either terminal.

Insert until this part.

A

Insert the cords pushing down the terminal clamp.

B

Note

• Do not place the AM loop antenna (aerial) near the system or other AV equipment, as noise may result.

Tip

• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.

4 Make sure the AM loop antenna (aerial) is connected firmly by pulling softly.

continued

– BASIC – Started Getting

15US