Selecting the Component

X/x/c,

FUNCTION +/–

AMP MENU

With the cover opened.

Selecting the connected component

You can use a VCR or other components connected to the VIDEO 1 or 2 jacks on the rear panel. Refer to the operation manual supplied with the components for further information on the operation.

Press FUNCTION +/– repeatedly until “VIDEO1”or “VIDEO2”appears in the front panel display.

Each time you press FUNCTION +/–, the mode of the system changes in the following sequence.

DVD t TUNER FM t TUNER AM t VIDEO1 t VIDEO2 t TV t AUDIO t DVD t …

Note

•When you use both the VIDEO 1 (AUDIO IN) jacks (analog connection) and VIDEO 1 (DIGITAL IN COAXIAL or OPTICAL) jack (digital connection), or the VIDEO 2 (AUDIO IN) jacks (analog connection) and VIDEO 2 (DIGITAL IN COAXIAL) jack (digital connection) at the same time, the digital connection takes priority.

Changing the input level of the sound from connected components

You can change the input sensitivity of the AUDIO IN (VIDEO 1, VIDEO2, TV) jacks on the rear panel and the AUDIO jack on the front panel.

1 Press FUNCTION +/– repeatedly until “VIDEO1,” “VIDEO2,” “TV,” or “AUDIO” appears in the front panel display.

2 Press AMP MENU.3 Press X/x repeatedly until “ATTENUATE” appears in the frontpanel display, then press or c.4 Press X/x to select a setting.

•ATT ON: attenuates the input level. Set this if distortion occurs during listening.

•ATT OFF: normal input level. Set this if the input level is low.5 Press .6 Press AMP MENU.The AMP menu turns off.

Operations Basic

33US