CTo connect the OPTICAL DIGITAL OUT jack of a component to the DIGITAL IN OPTICAL jack of this system

Connect the component to the DIGITAL IN OPTICAL jack using a optical digital cord (not supplied).

Note

Make sure that the connected jack combinations are correct; if you connect the audio cords to VIDEO 1 (AUDIO IN), you should connect the video cord to VIDEO 1 (S-VIDEO IN/VIDEO IN).

When you connect to the VIDEO 1 DIGITAL IN OPTICAL or COAXIAL jack, set the switch on the rear panel accordingly.

OPTICAL

COAXIAL

COAXIAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO1VIDEO2

DIGITAL IN

If you connect a digital satellite receiver with a DIGITAL OUT (COAXIAL or OPTICAL) jack

The digital satellite receiver can be connected to the VIDEO 1 DIGITAL IN OPTICAL or COAXIAL or VIDEO 2 DIGITAL IN COAXIAL jack instead of the VIDEO 1 or VIDEO 2 AUDIO IN jacks of the system.

The system can accept both the digital and analogue signals. Digital signals have priority over analogue signals. If the digital signal ceases, the analogue signal will be processed after 2 seconds.

If you connect a digital satellite receiver without a DIGITAL OUT jack

Connect the digital satellite receiver to the VIDEO 1 or VIDEO 2 AUDIO IN jacks only of the system.

Note

• Be sure to make connections securely to avoid hum and noise.

To listen to the portable audio source sound through the system

Connect the audio output jacks of the portable audio source to the AUDIO IN jack on the front panel of the system with the stereo mini-plug cord (not supplied).

System

Tip

When listening to MP3 format recordings using a portable audio source, you can enhance the sound.

Press FUNCTION +/– to select “AUDIO.” Connect the portable audio source. Press SOUND FIELD repeatedly until “P.AUDIO” appears in the front panel display.

To cancel, select other than “P.AUDIO.”

30US