8 Press C/X/x/c to select [YES] or [NO], then press .xThe measurement is OK.Disconnect the calibration mic, then select [YES]. The result is implemented.

The distance and audio level of the front speaker (L) and (R), and the audio level of the subwoofer are displayed. (The distance values are expressed in feet and meters for North American models, and meters for European models.)

Measurement complete.

 

 

FRONT L :

16ft

4.8m

0.0dB

FRONT R :

16ft

4.8m

0.0dB

SUBWOOFER :

 

 

+ 4.0dB

If OK, unplug calibration mic and select “YES”.

YES NO

xThe measurement is not OK.Follow the message, then select [YES] to retry.

Measurement failure.

Check front speaker connection.

Retry?

YES

NO

Note

•While the Auto Calibration function works:–do not turn off the power.–do not press any button.–do not change the volume.–do not change the function.–do not change the disc.–do not insert or eject a disc.–do not disconnect the calibration mic.

•Depending on the acoustics of the room, the displayed distance may not represent the actual distance.

To select the auto calibration setting modeYou can select the auto calibration setting mode.

1Press AMP MENU.

2Press X/x repeatedly until “A.CAL MODE” appears in the front panel display, then

press or c.3Press X/x to select a setting.

•ON: reflects the setting that is set by the auto calibration. When you adjust the woofer level using BASS/TREBLE (page 38) when set to “ON,” each time you set this function from “OFF” to “ON,” the adjusted value is restored.

•OFF: returns the woofer level to 0 dB, regardless of the speaker setting made by the auto calibration function.

4Press .

5Press AMP MENU.

The AMP menu turns off.

Tip

•When you perform [AUTO CALIBRATION], “A.CAL MODE” is set to “ON” automatically.

Adjustments and Settings Advanced

75US