Sony DAV-X1V 74US, [AUTO, Press, the front speakers, 5 Press X/x to select, The Control Menu appears, CALIBRATION], then press, Be quiet during the measurement

2 Place the calibration mic so that the		6
“FRONT” side of it is pointed toward
the front speakers.
Top view
Front speaker (L)	Front speaker (R)

7

Parallel

Calibration mic

FRONT

The front of each speaker should face parallel to the calibration mic, and there should be no obstruction between them.

3 Press FUNCTION +/– repeatedly until

“DVD” appears in the front panel display.

4 Press DISPLAY when the system is in stop mode.

The Control Menu appears.

5 Press X/x to select			[AUTO
CALIBRATION], then press			.
	1 ( 4 4 )
	3 ( 2 8 )	DVD VIDEO
	T 0 : 0 3 : 0 4
	AUTO CALIBRATION
	START

Press .

AUTO CALIBRATION

Connect calibration mic. Start measurement?

YES

NO

Press X/x to select [YES], then press to start the auto calibration.Be quiet during the measurement.

Measuring. Please wait a moment.

Note

•Avoid being in the measurement area and making noise during the measurement (about 1 minute), to avoid measurement failure. During the measurement, test signals are output from the speakers.

•Reflections from walls or the floor may affect measurements.

•If an error message appears, follow the message, then select [YES].

An error message appears when:

–the calibration mic is not connected.

–front speakers are not correctly connected.

–subwoofer is not connected.

–the left and right speakers are reversed.

–the left and right of the calibration mic are reversed.

74US