Searching for the starting point 
3 Touch .
Searching for the last scene of the most recent recording
– END SEARCH
This function is handy when you have played back the tape, for example, but want to start recording right after the most recently recorded scene. When you use a cassette without Cassette Memory, the END SEARCH function will not work once you eject the cassette after you have recorded on the tape. If you use a cassette with Cassette Memory, it will function even when you have ejected the cassette.
1 Slide the POWER switch repeatedly to select the
2 Touch .
The last scene of the most recent recording is played back for about 5 seconds, and the camcorder enters the standby mode at the point where the last recording has finished.
To cancel the operation
Touch [CANCEL].
bNote
•The END SEARCH function will not work correctly when there is a blank section between recorded sections on the tape.
zTip
•You can do this operation also by selecting [END SEARCH] in the menu setting. When PLAY/EDIT mode is selected, you can do this operation
by selecting [END SEARCH]
Searching manually – EDIT
SEARCH
You can search for the start point while viewing the pictures on the screen. The sound is not played back during the search.
1 Slide the POWER switch to select the
2 Touch .
Recording
Recording 47