you have recorded afterwards is not output from the speaker. Check the sound by using a TV.
Recording sound
1 Insert a recorded cassette into your camcorder.
2 Slide the POWER switch repeatedly to select the PLAY/EDIT mode.
3 Touch 
(play/pause) to play the tape.
4 Touch 
(play/pause) again at the point where you want to start recording the sound.
The playback pauses.
5 Touch 
.
6 Touch [MENU].
7 Touch 
/ 
to select 
(EDIT/
PLAY), then touch 
.
8 Touch 
/ 
to select [AUD DUB
CTRL], then touch 
.
60min 
0:00:00:00
AUD DUB CTRL
AUDIO
DUB
9 Touch [AUDIO DUB].
A green 
X mark appears on the LCD screen.
60min | 0:00:00:00 |
AUD DUB CTRL
AUDIO
DUB
10Touch 
(play) and start playing back the audio you want to record at the same time.
A red 
mark remains on the LCD screen while recording sound.
The new sound is recorded in stereo 2 (ST2) during the playback of the tape.
11Touch 
(stop) when you want to stop recording.
To dub on other scenes, repeat steps 3 and 4 to select scenes, then touch [AUDIO DUB].
12Touch 
, then 
.
To set the end point for audio dubbing
During playback, press ZERO SET MEMORY on the Remote Commander at the scene at which you want to stop audio dubbing. Then, perform steps 4 to 10. The recording stops automatically at the selected scene.
bNote
•You can only record additional audio over a tape recorded on your camcorder. The sound may deteriorate when you dub audio on a tape recorded on other camcorders (including other
,continued
Dubbing/Editing
Dubbing/Editing 105