[MENU], | (STANDARD SET) menu, |
then touch [LCD/VF SET] (p. 84).
3 Adjust the item with | / | , then | |
touch | . |
|
|
zTips
•If you rotate the LCD panel 180 degrees to the lens side, you can close the LCD panel with the LCD screen facing out.
•If you are using the battery pack for power source, you can adjust the brightness by selecting [LCD BL LEVEL] from the [LCD/VF SET] on the (STANDARD SET) menu (p. 84).
•When you use your camcorder in bright conditions,
press LCD BACKLIGHT to switch off the LCD
screen backlight ( appears on the screen.). This setting saves battery power.
•Even if you adjust the LCD screen backlight, the recorded picture will not be affected.
•You can turn off the operation confirmation beep by
setting [BEEP] in the | (STANDARD SET) |
menu to [OFF] (p. 87). |
|
Adjusting the viewfinder
You can view images using the viewfinder when you close the LCD panel. Use the viewfinder when the battery is running out, or when the screen is hard to see.
1 Extend the viewfinder.
2
started Getting
Getting started 21