To turn off the power
Slide the POWER switch up to OFF (CHG). Set the LENS COVER switch to CLOSE.
Step 4: Adjusting the LCD panel and viewfinder
Adjusting the LCD panel
You can adjust the angle and brightness of the LCD panel to meet various recording situations.
Even when there are obstructions between you and the subject, you can check the subject on the LCD screen during recording by adjusting the angle of the LCD panel.
Maximum 180 degrees
Maximum
90degrees
LCD BACKLIGHT
Open the LCD panel 90 degrees to the camcorder, then rotate it to the desired position.
To adjust the brightness of the LCD screen
1Touch 
.
2Touch [LCD BRIGHT].
If the item is not displayed on the screen,
touch 
/ 
. If you cannot find it, touch
20Getting started