Recording
If you are using a “Memory Stick Duo” for recording, refer also to the “Memory Stick Duo” section. (p. 117)
Symptom | Cause and/or Corrective Actions |
|
|
The tape does not start when you cSlide the POWER switch to turn on the
press REC START/STOP.cThe tape has reached the end. Rewind it, or insert a new cassette.
cSet the
cThe tape is stuck to the drum due to moisture condensation. Remove the cassette and leave your camcorder for at least 1 hour, then
The power abruptly turns off. | • [A.SHUT OFF] in the |
|
|
| (STANDARD SET) menu is set to [5 min]. |
|
|
| |||
|
|
|
| ||
cWhen approximately 5 minutes have elapsed while you do not operate your camcorder, the camcorder is automatically turned off.
Slide the POWER switch down to turn the power on again. (p. 19) Or use the AC Adaptor.
•Charge the battery pack. (p. 16)
The SteadyShot does not function. cSet [STEADYSHOT] to [ON] in the 
(CAMERA SET) menu. (p. 69)
The auto focus does not function. cSet [FOCUS] to [AUTO] in the 
(CAMERA SET) menu to enable auto focus. (p. 41)
cThe recording conditions are not suitable for auto focus. Adjust the focus manually. (p. 41)
A vertical band appears when | • This occurs when the contrast between the subject and the background is | |||||||
recording candlelight or electric light | too high. This is not a malfunction. |
|
|
| ||||
in the dark. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A vertical band appears when | • This phenomenon is called the smear effect. This is not a malfunction. | |||||||
recording a bright subject. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Tiny spots in white, red, blue, or | • The spots appear when you are recording in [SLOW SHUTTR], Super | |||||||
green appear on the screen. | NightShot plus, or Color Slow Shutter. This is not a malfunction. (p. 39) | |||||||
|
|
|
|
|
|
|
| |
The color of the picture is not | cDeactivate the NightShot plus function. (p. 39) |
|
| |||||
correctly displayed. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Picture appears too bright on the | cDeactivate the NightShot plus function in bright places. (p. 39) | |||||||
screen, and the subject does not | cCancel the back light function. (p. 37) |
|
|
| ||||
appear on the screen. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Picture appears too dark on the | • The LCD screen backlight is switched off. |
|
|
| ||||
screen, and the subject does not | cPress LCD BACKLIGHT. (p. 20) |
|
|
| ||||
appear on the screen. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The shutter sound is not heard. | cSet [BEEP] to [MELODY] or [NORMAL] on the |
| (STANDARD | |||||
| SET) menu. (p. 87) |
|
|
| ||||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
Black bands appear when you record | cSet [STEADYSHOT] to [OFF] on the |
|
|
|
| (CAMERA SET) menu. | ||
|
| |||||||
a TV screen or computer screen. |
|
|
| |||||
,continued
Troubleshooting
Troubleshooting 115