b Note
• If you do not use the battery pack for a long time, use up the battery pack completely before storing it. See page 138 about storage of the battery pack.
Lift up the viewfinder.
Set the POWER switch to (CHG) OFF.
1
2
3 Slide the battery pack out in the direction of the arrow pressing the BATT (battery) release button down.
The CHG (charge) lamp lights up and charging starts.
After charging the battery
The CHG (charge) lamp turns off when the battery is fully charged. Disconnect the AC Adaptor from the DC IN jack.
To remove the battery pack
POWER switch
BATT(battery) release button

To check the remaining battery – Battery

6 Slide the POWER switch up to (CHG) Info

OFF.

DISPLAY/BATT INFO

OPEN

POWER switch

You can check the battery’s current charge level and its current remaining recording time both during charging or when the power is turned off.

1Set the POWER switch to (CHG) OFF.

2Press OPEN and open the LCD panel.

3Press DISPLAY/BATT INFO.

The battery information appears for about 7 seconds.

Keep the button pressed to view it for about 20 seconds.

BATTERY INFO

BATTERY CHARGE LEVEL

0%0%

50%50%

100%100%

REC TIME AVAILABLE

LCD SCREEN:: 72 min

VIEWFINDER:: 95 min

ABattery charge level: Displays approximate remaining amount of power left in the battery pack.

BApproximate possible recording time using the LCD panel.

CApproximate possible recording time using the viewfinder.

started Getting

,continued

Getting started 15