
1 Check that you have a “Memory Stick” with the still image to be superimposed and a tape (only if you are recording on tape) in your camcorder.
2 Slide the POWER switch repeatedly to select the
3 Touch .
4 Touch [MEMORY MIX].
If the item is not displayed on the screen, touch /
. If you cannot find it, touch
[MENU], and select it from the (PICT. APPLI.) menu.
The still image stored in the “Memory Stick” will be displayed on the thumbnail screen.
Thumbnail screen
60min | STBY 0:00:00 |
MEMORY MIX: | OFF |
| OFF | M CAM | |
| LUMI. | ||
|
| ||
101 | CAM M | M CAM | |
CHROMA | CHROMA | ||
OK
5 Touch /
to select the still image to overlap.
6 Touch the desired effect.
The still image is superimposed on the movie which is currently displayed on the LCD screen.
60min | STBY 0:00:00 | |||||||
MEMORY MIX: | CAM M CHROMA | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
101
OK
7 Touch (decrease)/
(increase) to adjust the following.
For [MTCAM LUMI.]
The color scheme of the bright area in the still image which is to be swapped into a movie. When you want to record only the still image stored on the “Memory Stick” to
a tape, touch on the screen in
[MTCAM LUMI.] until the bar indicator is extended fully to the right side.
For [CAMTM CHROMA]
The color scheme of the blue area in the movie.
For [MTCAM CHROMA]
The color scheme of the blue area in the still image which is to be swapped into a movie.
8 Touch twice.
appears.
9 Start recording.
When you are recording on a tape
Press REC START/STOP.
When you are recording on a “Memory Stick”
Press PHOTO fully.
To cancel MEMORY MIX
Follow steps 1 to 4, then touch [OFF] in step 5.
bNotes
•When the overlapping still image has a large amount of white, the image in the thumbnail screen may not be clear.
•When you use the MEMORY MIX function in the mirror mode (p. 28), the picture on the LCD screen appears normally, without being
•You may not be able to play back pictures modified on your computer or recorded with other camcorders on your camcorder.
zTip
•The supplied
44Recording