[Completed.] appears when the recording is finished.

PROG. EDIT0:00:00:00

ADJ TEST

Completed.

5 Rewind the tape on your VCR, then play back in slow mode.

5 opening numbers for each [IN] and closing numbers for each [OUT] appear.

6 Take a note of the opening number value of each [CUT-IN] and the closing number value of each [CUT-OUT], then calculate the average number value for each [CUT-IN] and [CUT- OUT].

7 Touch [CUT-IN].

PROG. EDIT0:00:00:00

CUT–IN

0

-60~+240

8 Touch / to select the average number value for [CUT-IN], then touch .

The calculated start position for recording is set.

9 Touch [CUT-OUT].

PROG. EDIT0:00:00:00

CUT–OUT

0

-60~+240

10Touch / to select the average number value for [CUT-OUT], then touch .

The calculated stop position for recording is set.

11Touch [END] twice.

Recording the selected scenes as programs

When you are performing a digital program edit for the first time to a tape in a VCR, go through the procedures described in Steps 1 and 2 (p. 92 to p. 95) beforehand.

bNote

•You cannot dub the title or display indicators. However, you can dub the title which has already been recorded on a tape.

1 Prepare a cassette or a “Memory Stick.”

Insert a tape to be played back into the camcorder.

When you are recording on a tape, insert a cassette for recording into your VCR. When you are recording on a “Memory Stick,” insert a “Memory Stick” into your camcorder.

2 Touch .

3 Touch [MENU].

60min

0:00:00:00

 

 

 

 

 

 

 

 

 

 

 

 

MEMORY SET

STILL SET

MOVIE SET

ALL ERASE

OK

96Dubbing/Editing