The battery pack discharges quickly while the built- in light is turned on.

When you do not use your camcorder, turn the built- in light off and remove the battery pack to avoid turning on the built-in light accidentally.

When flickering occurs while shooting in the

mode, press LIGHT until appears.

The built-in light may turn on/off when you use the [PROGRAM AE] or backlight function while

shooting in the mode.

The built-in light is turned off in the following cases:

While the END SEARCH function is working.

Interval time of Interval recording.

When you leave it on for more than 5 minutes with the POWER switch set to CAMERA-MEMORY.

When it stays on in the mode for more than 5 minutes.

When you leave it on for more than 5 minutes with no cassette inserted or after the tape has run out.

When you use the conversion lens (optional), light from the built-in light is blocked and may not illuminate the subject properly.

Recording in mirror mode

You can turn the LCD panel towards the subject so that you and your subject can share the image being recorded. You can also utilize this function when recording yourself, or to keep the attention of small children attracted to the camcorder while you record them.

Open the LCD panel 90 degrees to the camcorder, then rotate it 180 degrees towards the subject.

A mirror-image of the subject appears on the LCD screen, but the picture will be normal when recorded.

28Recording