
Locating a scene on a tape for playback 
Searching quickly for a desired scene – Zero set memory
m REW
PLAY
STOP
DISPLAY
ZERO SET MEMORY
1 During playback, press ZERO SET MEMORY on the Remote Commander at the point you want to locate later on.
The tape counter is reset to “0:00:00” and appears on the screen.
60min | 0:00:00 |
| 20 |
P-MENU
If the tape counter is not displayed, press DISPLAY on the Remote Commander.
2 Press (stop) when you want to stop playback.
3 Press m REW.
The tape stops automatically when the tape counter reaches “0:00:00.”
4 Press PLAY.
The playback starts from the point designated “0:00:00” on the tape counter.
To cancel the operation
Press ZERO SET MEMORY on the Remote Commander again.
bNotes
•There may be a discrepancy of several seconds between the time code and the tape counter.
•Zero set memory will not function correctly if there is a blank section between recorded sections on the tape.
•The zero set memory function does not work with
tapes recorded on other devices in the Hi8 / standard 8 mm
system.
Searching for a scene by date of recording – Date search
You can locate the point where the recording date changes.
SEARCH M.
. / >
STOP
1 Slide the POWER switch repeatedly to select the PLAY/EDIT mode.
2 Press SEARCH M. on the Remote Commander repeatedly to select [DATE SEARCH].
58Playback