
Inserting a cassette
You can use mini DV cassette with | logo* only. |
Make sure that the power source is installed.
(1)While pressing the small blue button on the EJECT switch, slide it in the direction of the arrow. The cassette lid and compartment open.
(2)Insert a cassette with the window facing out into the cassette compartment.
(3)Close the lid by pressing the mark button.
* is a trademark.
1 EJECT | 2 | 3 | PUSH |
Notes
•The cassette lid may not be closed when you press any part of the lid other than the mark button.
•When you open or close the cassette lid, put down the grip strap.
•Be careful that your fingers are not caught in cassete lid.
To eject the cassette
While pressing the small blue button on the EJECT switch, slide it in the direction of the arrow.
To prevent accidental erasure
Slide and open the tab on the cassette to expose the red mark. If you try to record with the red mark exposed, the Land 6indicators flash on the LCD screen or in the viewfinder, and you cannot record on the tape. To
10